Do i have to make a cut for FULLFLASH of MC60???
Br, Moder
Do i have to make a cut for FULLFLASH of MC60???
Br, Moder
Now mobile works.
For the language, there's not ITALIAN...how can i do?
Many thanks to all
Br, Moder
...and if you try to flash (using Joker) your phone using other flash capacity, you will see one message:
Soft FlashID: 0001/220C
FlashID: 0089/8856
.............................
Warning: The software of the telephone does not correspond to FlashID!
dagos
Do i have to make a cut for FULLFLASH of C60???
Br, Moder
...X55data cable (serial cable) is used for the firmware upgrade and file transfer between PC and mobile phone.
C55 serial cable (service cable) is used for flashing/unlocking Siemens E-Gold phones (and somme S-Gold phones).
Diferences:
C55 use RX;TX;GND connection
X55 use RX;TX;GND;DCD;RTS connection
dagos
...THIS IS THE SIEMENS C55 PHONE!!!
Use the cable for this (marked on the RS232 female connector "For SIM C55") or DCA500 serial cable.
dagos
REHEAT??? how???
You're joking
if you're serious, write me how to do, so i try to make it quickly.
Mobile now work (i have made a call to customer service), but the display is all BLU....there's a way to resolve it?
I've tried to make DEFRAG EEP and DEL INSTANCES, but without success.
It happens this for DEFRAG EEP :
Backup EEPROM blocks...
No Ping mobile
Backup EEPROM blocks...
No Ping mobile
Backup EEPROM blocks...
HWID: 132 (MC60)
EELITE Info: free buffer 55592 bytes, free at all 55624 bytes, free for deleted 55624 bytes.
EEFULL Info: free buffer 84762 bytes, free at all 86484 bytes, free for deleted 21092 bytes.
Read All EELITE blocks from 1 to 285 ...
Do i have to make a cut for FULLFLASH of A60???
Br, Moder
[quote=goran79;3074500]
All ok...now mobile works
Many thanks to all
Yes,and use freia...it's easyest
du u open an oldsiemensService,or u discower a siemens factory garbage ????
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks