I have no ignition. The kill switch wont work. I''ve hooked a working one up but it still wont work. Where could the problem be
Tags for this Thread
+ Reply to Thread
Results 1 to 9 of 9
-
10-06-2009, 07:19 PM #1
Junior Member
Status- Offline
Join Date- Oct 2009
Posts- 6
Downloads- 0
Uploads- 0
2000 yamaha banshee, why wont my engine kill switch work?
-
10-06-2009, 07:19 PM #2
Real Member
Status- Offline
Join Date- Jun 2009
Posts- 52
Downloads- 0
Uploads- 0
Probably not the switch itself, but instead a problem in the harness. Be sure to check to the switch on another bike just to make sure it is not how you set it up. That recent of a banshee puts the KS right onto the harness so there might be short for that part. If you have a manual you can check the harness or take it to a mechanic.
Sorry to hear about the problem, good luck with it!
-
10-06-2009, 07:19 PM #3
Real Member
Status- Offline
Join Date- Jun 2009
Posts- 52
Downloads- 0
Uploads- 0
Probably not the switch itself, but instead a problem in the harness. Be sure to check to the switch on another bike just to make sure it is not how you set it up. That recent of a banshee puts the KS right onto the harness so there might be short for that part. If you have a manual you can check the harness or take it to a mechanic.
Sorry to hear about the problem, good luck with it!
-
10-06-2009, 07:19 PM #4
Real Member
Status- Offline
Join Date- Jun 2009
Posts- 52
Downloads- 0
Uploads- 0
Probably not the switch itself, but instead a problem in the harness. Be sure to check to the switch on another bike just to make sure it is not how you set it up. That recent of a banshee puts the KS right onto the harness so there might be short for that part. If you have a manual you can check the harness or take it to a mechanic.
Sorry to hear about the problem, good luck with it!
-
10-06-2009, 07:19 PM #5
Real Member
Status- Offline
Join Date- Jun 2009
Posts- 52
Downloads- 0
Uploads- 0
Probably not the switch itself, but instead a problem in the harness. Be sure to check to the switch on another bike just to make sure it is not how you set it up. That recent of a banshee puts the KS right onto the harness so there might be short for that part. If you have a manual you can check the harness or take it to a mechanic.
Sorry to hear about the problem, good luck with it!
-
10-06-2009, 07:19 PM #6
Junior Member
Status- Offline
Join Date- Aug 2009
Posts- 10
Downloads- 0
Uploads- 0
i honestly don't know but possibly you have it corrected wrong, check ur manuel if you have one!!!
good luck with your problem
-
10-06-2009, 07:19 PM #7
Junior Member
Status- Offline
Join Date- Aug 2009
Posts- 10
Downloads- 0
Uploads- 0
i honestly don't know but possibly you have it corrected wrong, check ur manuel if you have one!!!
good luck with your problem
-
10-06-2009, 07:19 PM #8
Junior Member
Status- Offline
Join Date- Aug 2009
Posts- 10
Downloads- 0
Uploads- 0
i honestly don't know but possibly you have it corrected wrong, check ur manuel if you have one!!!
good luck with your problem
-
10-06-2009, 07:20 PM #9
Junior Member
Status- Offline
Join Date- Aug 2009
Posts- 10
Downloads- 0
Uploads- 0
i honestly don't know but possibly you have it corrected wrong, check ur manuel if you have one!!!
good luck with your problem
ReplyThread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
MY 2001 Yamaha banshee has a knock in the engine. Why would this occur?
By StevieLotus in forum YamahaReplies: 1Last Post: 10-03-2009, 08:09 AM -
How much is a 2000 model yamaha banshee worth?
By Speedy in forum YamahaReplies: 4Last Post: 08-21-2009, 03:26 AM -
Installed Kill Switch on Yamaha YZ125?
By Scott H in forum YamahaReplies: 0Last Post: 03-18-2009, 05:50 PM -
Did I install My Kill Switch Correctly on my Yamaha?
By Scott H in forum YamahaReplies: 0Last Post: 02-26-2009, 12:17 PM -
how fast will a 2000 yamaha banshee go?
By toolman in forum YamahaReplies: 5Last Post: 01-28-2009, 02:59 PM
Bookmarks