Thread: New solution for 2118 or BA20 problem

I've flashed it with All 2.0.5 XxZ, then Winswup Flash 31.
then unlock with C45_MT50 unlocker.
then it was WRONG SOFT.
I read log , Winner58 calculate map for me, in log request section.
But he send it to forum not via email.
when i copy it to file and open with Logger 4.02 it writes me ERROR IN MAP FILE (


any idea ?

PAli

Hi All....

I try to tell u procedure to solve a problem about 2118 and BA20

Step by step

*** BA20 ***

1. FLash u r C45 with all34 205 with flx files until u r c45
Wrong Software

2. Read with logger 3.0 or 4.0 and make a map (with robot or
hardware dongle) use C45 type

3. Write map to u r phone, select c45 type first to read from u r
map and than change to SL45 type for Write IMEI... OK?

*** 2118 ***

1. Use my flash file 2118SL45.bin (.bin file) and use Unisiemen to
make u r 2118 wrong software... (Get that file in my group)

2. Use SL45 type to flash the file with Unisiemen...

3. Read with logger 3.0 or 4.0...

4. Change type from u r log file to C45 series (manual)... and than
make a map use robot or hardware dongle....

5. Write map to u r phone, select c45 type first to read from u r
map and than change to SL45 type for Write IMEI... OK?


Thanks
B.R

Eriko

for 2118, open ur phone, prepare hotair and flux, took off 1 little capacitor, 1 big capacitor, 1 little resistor and the w16 flash, flash the phone with all34 by Xzz and flx file, write the map with c45-mt50 unlocker .. DONE ! you got c45 instead of 2118

Sixth`SenSe :
Thx for helping, but i managed it without your "help"

Eriko:
Can you pls calculate me a map file?I posted it to log request
Thx

klik this if your 2118 change with C45

Yep its true :-)

It works fine! Trust him!

Proggy

Load your MAP in some TXT editor, and delete on end of
each line "blank" space, like this:

238479284982048_ (this is blank)

must be like this:

238479284982048

@genocite
erico just use cable and computer...! no risk

100% tesed!

for c45 2118 and c45 ba20

I did it also with HEXEDIT,
not helped

Pali

explain to eriko's section 2118
*** 2118 ***

1. Use my flash file 2118SL45.bin (.bin file) and use Unisiemen to
make u r 2118 wrong software... (Get that file in my group)

2. Use SL45 type to flash the file with Unisiemen...

3. Read with logger 3.0 or 4.0...