Thread: This is how I converted my s45 into s45i 100% succesfully

hehe :>

if it has java ...

>hello i can not flash my phone.it gives me report : Cannot connect to phone with bootstraploader ... any ideas ?


Windows XP?
I was getting crazy trying to do this in XP (Celeron 1700). Then I tried on another machine with Win98 (Celeron 433) and it worked PERFECTLY!

Good luck...

There is No Java for S45i ....

The "i" goes for improved , and only you get e-mail extra from S45.
I think this has been answered many times ....

(Only you can see a 'javadumm' (dummy) module in Net Monitor, as the S/ME45 did. Just left for future upgrades that never did ... ).

This isn't working for me yet...

Did all the steps and after this loaded S45i activator. First it worked, phone started and I could access the phone in S45i V4. Without any warning the phone swiched off in the menu and after that it said wrong software. I tried to fix it with S45i activator but that didn't work. I flashed it with my backup of FW30 and after that performed the same steps to upgrade to S45i. Only get a low beep or no sound at all now. All patches are displaying GOOD. Tried to unlock after patching, no result. Did the above steps now for over 4 times and can't get it working... What am I doing wrong

This is how I upgraded from ME45 to S45i (ME45 FW26 original CE20 chipset). Most elements are from yul and Safrane but I've added some steps

1. Backup contacts/agenda to Outlook with SiemensQuickSync
2. Backup Explorer maps with Data Exchage Software
3. Make full backup of phone (S/ME45Tools) so you can recover if something goes wrong
4. Remove SIM (don't know if this is necessary)
5. Flash phone with winswup S45i v04.......
6. Depending what kind of model you have S45 or ME45 take corresponding file:
for S45 http://www.o45m.ru/program/290000x050000_s.zip
for ME45 http://www.o45m.ru/program/290000x050000_m.zip
7. Take S/ME45Tools and flash this file at address: 290000 and size: 050000
8. In S/ME45Tools go to IMEI, read phone first and press UNLOCK
9. Remove battery for some seconds (don't know if this is necessary)
10. Run S45i Activator, READ PATCHES and check out which phone values are BAD (right window). Mark in left boxes those values which are BAD. Don't uncheck other marks accept unmark S45 patch (alt) and/or ME45 patch (alt) and mark S,ME45 patch (that's also described in the right window). You can also uncheck Airplane warning if you want. Press WRITE PATCHES.
11. Remove battery for some seconds (don't know if this is necessary)
12. Start and shut down phone (don't know if this is necessary)
13. Insert SIM and start phone
14. Format flexmem in phonesetting or with Data Exchange Software
15. Download and install XTND Connect from Siemens
16. In XTND Connect settings, remove all connections between fields Outlook and phone. Set right fields Outlook/phone (address to home address/last name to last name/...) and synchronise
17. Put back your bitmaps/ringtones/voicememo's/...

Voila you have a great working S45i with all your ME45 settings

WARNING: I did everything on speed 57600 instead of standard 115200

In this topic you can read where to download the software (Divane )

:>>> 10x but i do not need it :P

I think you screwed up your eeprom. You should upload a backup (if you have made it), or simply wait for someone to send it to us, cos i desperately need one too

REQUEST: Can anyone send me s45(i) EEPROM??
Please..it's urgent!
Mail it to me at [email protected]
TIA
-V-

P.S. I know that my problem is EEPROM, cos i used Nutzo's tool for .map creatin and it reported invalid eeprom blocks. Try it.

no windows 98

as i said:
if you want to upgrade me/s45 to s45i this site will be usefull:
http://eh.student.utwente.nl/~landy/
user mobile
password elibom

download s45i firmware,flash the phone and then use s45iActivator!
100% works !

all software you need is on my site venci.8--8.net/siemens i have uploaded there everything that need to upgrade me45 to s45i without problems
Enjoi

i know this site by the way :P it has usefull programs :>