Thread: How to convert 4 lugs to 5lugs on honda civic ex 05 coupe?

I have a honda civic 05ex coupe and I want to convert 4 lugs pattern to 5 lugs pattern. I don't know what parts should i get to do it, and I also want to change the front rotor brakes and rear brake ( my rear brakes are drum and I want to convert it into brake rotor). Can you guys help me out with this?
thankz

#1 get a wheelbarrow full of money! #2 If you are lucky you might find a Honda with 5 lug wheels, - you then might be able to pull hubs off and change out with stock parts! Or you might be able to buy adapters at auto parts store (or custom wheel shop)! This will cost you plenty! For non drive wheels you can change hubs, -- but you need to find one at junkyard (preferably) that has disc brakes on back and buy all the stuff needed to remove drum brakes and backing plates and install lines that go with disc brakes! Then you have problem of parking brake, which has to have all the conversion stuff to to work!

When you get finished with that, all you have to do is get master cylinder for disc brakes, (for all 4 wheels), change anti skid brake parts (if so equipped) and possibly "shuttle valve that shuts off fluid flow should one "end " of car have brake leak, and then I guess you are ready to go!

Possibly you can buy conversion kit for disc brakes at a"speed shop/custom car supply" place for somewhere around $900-1000! They also might have adapters to bolt on. but this will make your wheels sit out about 1 1/2" probably - so you might need "deep dish" wheels to go that way!

To me it would be unwarranted expense, as only about 1/3 of braking goes to rear wheels! And if you are going to "play competition" you will probably tear car up and ruin it in short order anyway!

But then what do I know!! I have only been fixing cars since I was 9,---which is almost 60 years ago!