It wouldn't be much of a hobby if everything worked fine all the time.
It wouldn't be much of a hobby if everything worked fine all the time.
just a tip with the junk vxl3s speed control the button will stick in on you and cause the truck to do all kinRAB of weird stuff i always pull up on the button with with my finger nails when i turn the truck on to make sure. and if you are driving on a bumpy rough surface it will also cause your button to stick also. and also check your connector for your battery to see if it has a dead spot,put the truck on a block and give a little bit of throttle and wiggle the wires and connections at the same time to see if the truck cuts out and if it does find the wire or conection that is doing it and fix it and if the connector is not making a good connection you can coat the flat bars with a real thin coat of solder to make them thicker and you will never have a connection problem again .and like other people said get a 2 or 3s lipo and you will like the truck alot more and have more power and longer run times but you will need to make sure the green light is on if you are running lipos.good luck with a fun truck
I just bought a used vxl-3s and im having the same problem mine wont move but the wheels turn only my esc blinks green i havnt tried any of my lipos yet and the batteries i used were nimh close to dead but i found all this advice helpful cuz i was just going to throw it away.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks