98 Nissan Frontier Flashing Airbag light after accidentally disconnecting a

[Loco]

wire. How do I reset it.? The Dealer wants 100 bucks and I just spent a ton of money at the junlk yard on replacement parts.. What can I do?

I was told that I have to enter dianostic mode and tried the series of steps but I cannot get it to enter the mode. Please help.
Micheal I am updating because before I read your post the air bag went off and I bit my tongue off... Haha just kidding.

Actually I am updating cause what I did to get it to go out just blows me away. I turned the ignition to on and then pressed the door jam light switch 5 times. The flashing light starts flashing weird and then turns out. Then I turned it on and it is gone. No joke.

Have you ever heard of this?...

[Michael]

disconnect the battery first, and if you unplugged the ABS wire and you dont wait at least 5 minutes after disconnecting the battery, you risk the possiblity of the air bag going off. I have seen a mechanic bite off his tongue, when he removed the airbag to do a tiltwheel repair, and plug in the airbag and it went off.
you cannot reset that light without a scan tool. Auto zone can reset the light for free after you do as I explained to reconnect the wire
good luck

[wildmanny2]

On most every vehicle,the air bag light will go out once the fault is fixed without needing to do any thing else.There is probably still something disconnected.