Ok i have a 1988 toyota pickup truck. 4x4 3.0L. I just replaced both headlights. The low beams work. But only the driverside high beam works. I repaced the passanger headlight because of this but it did nothing. The fuses are all fine but the light still does not come on highbeam when turned on. the drivers side light is still fine. What could this be? bad relay? Bad wires? what?
Tags for this Thread
+ Reply to Thread
Results 1 to 3 of 3
-
11-08-2009, 02:16 PM #1tearysky
GuestI have a 1988 toyota pickup, Low beam works. Only one high does?
-
11-08-2009, 02:17 PM #2
Junior Member
Status- Offline
Join Date- Jun 2009
Posts- 18
Downloads- 0
Uploads- 0
may be the bulb is bad try pluging in the good one from the drivers side in the passengers side see what happens
-
11-08-2009, 02:18 PM #3
Member
Status- Offline
Join Date- Jun 2009
Posts- 68
Downloads- 0
Uploads- 0
Most likely cause is bad connection at bulb. Please use test light to confirm, check at connector, then check wire at back of connector. Should this not prove out, then simply run wire from drivers side to passenger and be happy. luv ser
Reply
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Are the low beam and high beam bulbs both H7 for an 01 Honda CBR 600 F4i?
By AiRtRaCk B in forum HondaReplies: 0Last Post: 05-20-2011, 08:25 AM -
Turn the High beam to low beam
By Thomas Suffocate in forum DucatiReplies: 1Last Post: 09-12-2010, 01:10 PM -
HID (High & Low beams) or Halogen (High beam only) and HID (Low beam only)
By PB46 in forum Harley DavidsonReplies: 5Last Post: 09-09-2010, 09:38 PM -
Are the high beam bulbs the same as the low beam bulbs on a 2005 jeep cherokee?
By rtnrtn r in forum ChryslerReplies: 0Last Post: 10-26-2009, 05:50 PM -
2001 Chevy Cavalier driver's side low beam won't work, high beam ok?
By Kathryn in forum GMReplies: 2Last Post: 12-14-2008, 07:34 PM
Bookmarks