Welcome to Discuss Everything Forums...

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.


 

Tags for this Thread

+ Reply to Thread
Page 4 of 14 FirstFirst ... 23456 ... LastLast
Results 31 to 40 of 131
  1. #31
    Doctormobile_14
    Doctormobile_14
's Avatar
    Guest

    code works 1000%!!!

    Sagem


    *#78737322867973738# = *#superfactoryreset# : Resets personal data (remove SIM card first)

    *#73287489263373738# = *#securitycodereset# : Resets security code to 0000 (remove SIM card first)



    If you search here in the forum sure you will find the answer , this forum is really a big library then next time i suggest ti you to use the usefull search button.....
    For example your IMEI is 35074635268234-2
    take the four last digits without the 15th digit
    you have 8234 ----> 8+2+3+4 = 17 modulo 10 = 7 then x =7
    if your firmware is
    DJ3,5C or DJ3,5D or DJ3,5E or DH3,5H then y=5
    else if your firmware is
    DF4,5E or DF4,5F or DH4,6J or DJ4,6G or DG4,5H or DI4,6G then y=4
    else if your firmware is
    JC3,6N or JC3,6O or JC3,6L then y=2
    Now power on your phone without sim and put : *226632623XY and Ok
    Salam


    For the last time on this forum...

    TEST MODE CAN'T BE ENTERED ON MYX3D, MYX5D, MIX5M, MYX6 SAGEM MODELS !!! SO STOP POSTING STUPID REQUESTS FOR TEST MODE CODE FOR THESE PHONES. STOP MYX6 UNLOCK CODE REQUESTS AS THERE IS NO CALC FOR IT YET AND PROVIDED FIELDS ARE UNUSEFULL.

    TEST MODE CAN BE ENTERED ON MW/MC9XX, MW/MY30XX, MYX3, MYX5:

    FOR MW/MC9XX:
    *0287257X WHERE X IT'S AN NUMBER BEETWEN 0 AND 9

    FOR MW/MY30XX:

    WITH DX4,X FIRMWARE
    *2266326234Y WHERE Y=LAST FOUR IMEI DIGITS(WITHOUT CHECK DIGIT) ADDED MOD 10. MOD 10 MEANS THE REST BY DIVISION OF 10.

    WITH DX3,X FIRMWARE
    *2266326233Y WHERE Y=LAST FOUR IMEI DIGITS(WITHOUT CHECK DIGIT) ADDED MOD 10. MOD 10 MEANS THE REST BY DIVISION OF 10.

    FOR MYX3, MYX5:
    *226632623XY WHERE Y=LAST FOUR IMEI DIGITS(WITHOUT CHECK DIGIT) ADDED MOD 10. MOD 10 MEANS THE REST BY DIVISION OF 10. X IT'S FIRMWARE DEPENDENT AND CAN BE A NUMBER BETWEEN 0 AND 9.

    U CAN ACCESS FIEL 94 ? THAT'S PERFECT ! WRITE TO FIELD 94 VALUE 0X01 AND U'LL PHONE (M51 AND ABOVE MODELS) WILL BE IN PERMANENT TEST MODE.

  2. #32
    Ibrahim Koritim
    Ibrahim Koritim
's Avatar
    Guest

    code works 1000%!!!

    This work is than good - you are very good brain - go on - thanks . by the way could you please send to me UNLOCK code for SANYO CATANA 6600 - sprint . oropacenter@yahoo,com
    thanks a lot .. Ibrahim

  3. #33
    monnoxo
    monnoxo
's Avatar
    Guest

    code works 1000%!!!

    very good this code can work with samsun c426

  4. #34
    mzkahack29
    mzkahack29
's Avatar
    Guest

    code works 1000%!!!

    very very good work thanks brother....

  5. #35
    taoufik.om
    taoufik.om
's Avatar
    Guest

    code works 1000%!!!

    Philips
    PHILIPS DIGA *#06# IMEI
    *#3333*# Blocking list
    *#2558*# All time connected
    *#3377*# IMEI,FLAGS,SIM LOCK
    *#7489*# Security code ???
    *#3353*# clear Blocking List
    PHILIPS FIZZ *#06# IMEI
    *#8377*# Software version
    *#1234*# Security code
    *#5644*# Service code
    PHILIPS SPARK *#06# IMEI
    *#2254*# Status register
    *#2255*# Some kind of monitor mode during dialing.
    *#2558*# Time connected to net.
    *#2562*# ??? number of reconnections
    *#2565*# Warm restart
    *#3333*# BLOCKINGLIST
    *#2377*# ???BERR Phone waits random time and reconnects to network.
    *#3377*# Information, SIM-lock
    *#7378*# SIM info
    *#7489*# SECURITY CODE
    *#7693*# Sleep mode
    *#7948*# Turn off phone
    *#8463*# Information on sleep mode
    PHILIPS GENIE *#06# IMEI
    *#2254*# STATUS REGISTER
    *#2255*# Some kind of monitor mode during dialing.
    *#2377*# ???BERR reconnect?
    *#2355*# Near Cell Mode. U can see parameters of three nearest cells
    *#2558*# Time connected
    *#2562*# number of reconnections
    *#2565*# Warm restart
    *#2772*# Base Station Paging Multiframe.
    *#2847*# HIDDEN MENU!: 5.5:Closed User Groups
    *#3333*# BLOCKING - list
    *#3353*# clears Blocking list
    *#3377*# SIM LCK
    *#4263*# Hs-OK:0 KO:0 , HNS-OK:0 KO:0
    *#4377*# ??? battery charging ???
    *#7378*# SIM phase
    *#7489*# Security code
    *#7693*# SLEEP-mode
    *#7948*# Turn off
    Samsung
    E710/715
    *#32436837# DAI ON Digital Audio Interference On
    *#3243948# DAI OFF Digital Audio Interference Off
    *#9324# MONITOR
    *#0746# SSMS MEMORY:20
    *#0842# vibra on
    *#0289# buzzer on
    *#4357# HELP (4357) This screen!!!!!!!
    *#7777# verze SW
    *#8888# verze HW
    *#9999# Revize HW
    *#0782# cas provozu, zapnit? a vypnit? - LIVE TIMER
    *#0523# 41 (80) menu: 12
    *#0638# SIM: f23003 F230 030
    *#0778# SST size: 10
    *#9273696# Java D/L setting
    *#92782# Wap user agent
    *#9998*5646# change operator logo at startup
    *#9998*76# production number
    *#9998*968# view melody for alarm - YAMAHA OK
    *#0778# Sim Service table
    *#9998*523# or *#9998*0523# or *#0523# Display Contrast
    *#9998*288# or *#9998*0288# or *#0288# Battery & Field Infos
    *#9998*5282# Java menu (GRPS/CSD settings for JAVA server)
    E700/S500 100%..... X100/X600???!!!???
    #*566335# Wap model ID
    #*5663352# java model
    #*5663351# model
    #*53696# java download mode
    #*536963# serial enabl others disabled
    #*536962# HTTP enabl WAPSAR disabled
    #*536961# WAPSAR enabl HTTP dis
    *663867 MF file dumped
    *335 All MMS mes deled
    *2767*77667# Spain MMS settings
    *2767*78667# Portugal
    *2767*65667# Netherland
    *2767*29667# Czech
    *2767*28667# Austria
    *2767*48667# Italy
    *2767*37667# France
    *2767*85667# Uk
    *2767*33667# Germany
    *2767*73738927# MMS Reset????
    *2767*77927# Spain WAP Setting are applied
    *2767*78927# Portugal
    *2767*29927# Czech
    *2767*65927# Netherlands
    *2767*28927# Austria
    *2767*37927# France
    *2767*48927# Italy
    *2767*85927# Uk
    *2767*33927# Germany
    #7263867# Ram Dump On
    #*3232# Current Mode - DCD mode
    #*3231# DCD en TRACE dis
    #*3230# TRACE en DCD dis
    #*7247# ??????
    #*3683# ??????
    #*3777# ??????
    #*3779# ??????
    #*8645# ??????
    #*6428# MIC measuremnt CMD: Set, DSPMTCV11, MICHDW in cihard. opt
    #*6422# MIC dep RXdata CMD: Set, DSPMTCV11, MICHDW in cihard. opt
    #*6421# MIC on CMD: Set, DSPMTCV11, MICHDW in cihard. opt
    #*6420# MIC off CMD: Set, DSPMTCV11, MICHDW in cihard. opt
    *#7465625# Stav z?mku
    #7465625*28746# Aktivn? z?mek deaktivov?n
    *7465625*28746# Automatick? z?mek perzonalizov?n
    #7465625*2827# Z?mek Auto CP deaktivov?n
    *7465625*2827# Z?mek s?te se mus? aktivovat
    #7465625*2877# Z?mek Auto SP deaktivov?n
    *7465625*2877# Z?mek s?te se mus? aktivovat
    #7465625*28782# Automatick? z?mek podskupiny deaktivov?n
    *7465625*28782# Z?mek s?te se mus? aktivovat
    #7465625*28638# Automatick? z?mek s?te deaktivov?n
    *7465625*28638# Automatick? z?mek s?te perzonalizov?n
    #7465625*228# Aktivn? z?mek deaktivov?n
    *7465625*228# Aktivn? z?mek perzonalizov?n
    #7465625*746* ???????
    *7465625*746* ???????
    #7465625*27* ???????
    *7465625*27* ???????
    #7465625*77* ???????
    *7465625*77* ???????
    #7465625*782* ???????
    *7465625*782* ???????
    #7465625*638* ???????
    *7465625*638* ???????
    *#8377466# SW + HW info
    *#8888# HW info
    *#9999# SW info
    *#8999*8376263# komplet info
    *#8999*636# IPD info
    #*2677# ARM state: None
    #*0000# ??????
    *#8999*324# Net monitor??
    #*6200#
    #*6700#
    #*6900#
    #*7200# neplatn? ?roven pr?stupu
    #*6100# command #*6100# Executed
    *2767*3700# SGH-E700 BSI
    *2767*7100# SGH-S100
    *2767*8200# SGH-V200
    *2767*7300# SGH-S300
    #0111*codigo#
    *2767*637#
    *2767*688#
    *2767*wap#
    *2767*media#
    *2767*mms#
    *2767*226372# Camera Reset
    *2767*688# MEP off
    *2767*927# WAP
    *2767*2878# E2P Custom reset
    *2767*3855# E2P Full reset
    *2767*2878# Sec reset
    #*7828# C??? Midi Ri51
    #*5111# PI 0813 33 99 MSI 7 NA 0 18 P99 T00 CffHff
    #*2562# nejakej reset
    #*2565# no blocking General Defense
    #*3353# General defense Code Erased
    #*3837# reset ???????
    #*3849# reset ???????
    #*3851# reset ???????
    #*3876# reset ???????
    #*7337# reset ???????
    #*5376# reset All SMS Deleted
    #*7222# Operation Typ: Class C GSM
    #*7224# Error!!!!
    #*7252# Operation Typ: Class B GSM
    #*7271# multi Slot Class 1 GPRS
    #*7274# multi Slot Class 4 GPRS
    #*2787# CRTP on - Batery options
    #*3737# L1 AFC DeltaF -36 NbAfcCorr 0 AdjustFoi 0 CumFoi 0
    #*3825# Command #*3825# Executed
    #*5133# L1 HO Data Async HO 83 Sync HO 0 HO Fail 0 TCH 40
    #*7288# GPRS Detached
    #*7287# GPRS Detached
    #*7666# SrCell data RAC 255 NMO 255
    #*7693# Sleep Deact
    #*7284# Class B
    #*2256# Calibr - info
    #*2286# DATAbattery
    #*2527# GPRS switching set to class 4
    #*2679# Copycat feat. Activated
    #*3940# External looptest 9600bps not avalible in SYSOL2!
    #*4263# handsfree mode Activated
    #*4700# Half rate deact
    #*7352# BVMC Reg vaule Set BMVC to 00H For Cmd set DEBUGBATTERY in cihard.opt
    #*8462# Sleeptime sinc SwitchOf
    #*2558# Time ON For Cmd set DEBUGBATTERY in cihard.opt
    #*3370# EFR Deact
    #*3941# External looptest 115200bps not avalible in SYSOL2!
    #*5176 L1 Sleep TOI N:5 TOI P:0
    #*7462# SIM phase 3
    #*7983# Voltage/Freg Deact
    #*7986# Voltage Activated
    #*8466# Old time
    #*2255# Call failed mode: Command not Implemented
    #*2285 nic
    #*46539 nic
    #*5143 nic
    #*7629 nic
    #*7646 nic
    #*7665 nic
    #*7633 nic
    #*7626 nic
    #*5174 nic
    #*5175 nic
    #*5177 nic
    #*5156 nic
    #*2282 nic
    #*5132 nic
    #*7276 nic
    #*2355 nic
    #*3333 nic
    #*3377 nic
    #*5187# L1C2G trace Activated
    #*6837# Official SW version: 120107A1
    #*7524# KCGPRS: +data
    #*7562# LOCI GPRS: +data
    #*7638# RLC allwazs open ended TBF Actiated
    #*7632# Sleep mode Debug: +data
    #*7673# Sleep mode RESET
    #*2337# Permanent Registrtion Beep: NOT YET IMPLEMENTED
    #*2474# For Cmd set DEBUGBATTERY in cihard.opt
    #*2834# Audio Pth Mobile Normal
    #*3270# DCS support Deact
    #*3282# Data Deact
    #*3476# EGSM Deact
    #*3676# falh volume formated
    #*4674# IMSI: +data
    #*4760# GSM Activated
    #*4864 pro tento model nic
    #*5171 data
    #*5172 data
    #*5173 data
    #*7326# Accessorz: vibrator
    #*7676# Command #*7676# Executed
    #*7683# Sleep variable
    #*7762# SMS Bearer CS Activated
    #*7957# Command #*7957# Executed
    #*8465# Time in L1 +data
    #*9278# Command #*9278# Executed
    #*9795# WTLS key Reset
    #*2252# Current call: +data
    #*2836# AVDDSS Managment Deact.
    #*3877# Dump of SPY trace: +data
    #*7728# RSAV done
    sharp reset EEP
    1, push at once key 0+3+right option key up+red key (white screen)
    2, in sequence push key 0,1,2,3, right option key up,1 (service menu)
    3, write 99 and push right option key up
    4, write 01 and push right option key up (now start RESET EEPROM)
    Wait.....
    5, push any key
    6, push blue key menu (save)
    7, power off
    Sharp GX-10 unlock solution
    With Sim Card (of locked network) in phone:
    *01763*6371# and press M.
    In menu go to: SETTINGS->SELECT->SECURITY
    then in Security menu:MEP LOCKS->SELECT
    insert default security code 0000
    In menu go to NETWORK and choose DEACTIVATE
    press SELECT and insert 812664697614
    Press OK, phone anwser will be:
    Sony-Ericssion
    *#06# Imei Number.
    >*

  6. #36
    hook
    hook
's Avatar
    Guest

    code works 1000%!!!

    thank you so much..........

  7. #37
    shohag
    shohag
's Avatar
    Guest

    code works 1000%!!!

    NEED UNLOCK CODE...............
    Motorola V3
    imei: 354519016270374
    provider: T-Mobile

  8. #38
    Rizwan ch08
    Rizwan ch08
's Avatar
    Guest

    code works 1000%!!!

    Brother its fantastic keep helping. we like that
    share your skills with other.
    thx..................


    [email protected]

  9. #39
    joicute
    joicute
's Avatar
    Guest

    code works 1000%!!!

    Hi Guys....great Codes...thanksss..

  10. #40
    beenthere2020
    beenthere2020
's Avatar
    Guest

    code works 1000%!!!

    Wow thats awesome!!!!!!!!!!!!!!! but would you have the code for nokia 6070b

 

 

Quick Reply Quick Reply

Click here to log in


In what corner do we have Search box?

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 0
    Last Post: 03-07-2011, 04:59 AM
  2. What HTML code works for this ...... ? :)?
    By Kerry Rian in forum Discuss HTML
    Replies: 0
    Last Post: 02-24-2011, 04:12 AM
  3. Can someone explain how this simple PHP code works ?
    By Arshad .. in forum Discuss PHP
    Replies: 0
    Last Post: 01-26-2011, 06:07 PM
  4. Replies: 0
    Last Post: 03-19-2010, 11:03 PM
  5. I need a right alignment html code that works?
    By Genivev R in forum Discuss HTML
    Replies: 3
    Last Post: 02-15-2010, 12:49 AM

Bookmarks

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
  •