Thread: Flashing Upgrading KC910|Flasher|Firmware|Guide

First the problem is that the phone always stay in LG logo only for about 5 second when I turn it on, then after that it will automatically turn off by itself.

It won't turn on anymore after that, ONLY if I let the battery out and put it back it will just do the same procedure as the LG logo then 5 second will turn on again!

When I plug it in to this flasher it detected as a " EMERGENCY MODE "

nasir bhai i have a problem i was flashing my kc 910 phone is on problem is that on network pls help i was flashing all firmware

After flash KC910 only yellow screen and written "refrshing". I also tried with original version but same.

hi to all!!! im new with the renoir kc910i and I want to know if this update work on my phone without break it or if this firmware are better of the original, thanks!!!

Sure buddy, soon i ll make one for you.



which link exactly ?



Dada, some people already succeed.

No Problem, you can flash in emergency mode.

Yes dada you are right.

I have a KC910 with this Sw version:

KC910-MSM6281-V10b-NOV-21-2008-XX (R409615C)

I try to upgrade to V13d (I need italian language) found here:

http://www.mygreatphone.com/forum/lg-renoir/12487-mgp-firmware-release-v13d-finally-released.html

Upgrade process start but After NV backup appear Error Nand write.
Now the phone start with yellow screen.
I try to flash:
v10j
v10b
in emergency mode but the problem it's the same.
Solution?
Thanks in advance
B.R.

Hi

Check your current firmware version. if its higher than your current one. then you can update. if not then simply avoid.

also check LG's Official Update page.

First you tried v 13. and then u r trying v10