Thread: c55 v18 dead after A50_C55 unlocker.rar

FW206 - means that flash is micron MT28F640J3FS-12 MET 64Mbit (8Mbyte ) flash IC.
I 'll see specification and try to patch boot for this flash

Ok, I'm waiting for Your sw
And You were wright
I've got 'write map error'......
I cannot believe....

@ shoneb

It 's strange. Curently winswup for c55 support all flash types used by siemens.even if the flash is unsupported you will not see the ffff error, cause flash ID should be readed in all cases.

I cannot manage to revive this one.......
Winswup says 'unknown flashcode FFFF'.......
A50/c55 wizzard cannot verify multiple adresses.......

Hi, i have same problem with c55, i try flash with winswup and it's ok but i can't write eep (with and without test point) with wizard tool. How can i rewrite original eep? i have it

Thx and best regards

@abe: yes, it stops at 100% reporting same error as on 33 and 66% and then exits...

Phone i have dead, does not make bzzzzzzzzz.... I can flash it with winswup but no effect...BTW winswup reports 172C or something like that flash type.

I have full eeprom readed with wizard... I checked phone, IMEI is still ok and there is just slight difference between current eep in phone and one was before unlocking...

Can be flashed, can be unlocked... Just don't want to power on

Should it make bzzzzzzzz even with erased eeprom ?

If yes then this could be hardware problem...


BR

Vule

I saw I posted it again but can't delete my post!??

@ legija
Did the bird say WHAT is the solution?

I have the same problem and same flash as shoneb
i guess we all have to wait for solution

Let's hope that communicatel will come up to something.....