Welcome to Discuss Everything Forums...

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.


 

Tags for this Thread

+ Reply to Thread
Page 2 of 5 FirstFirst 1234 ... LastLast
Results 11 to 20 of 48
  1. #11
    moder10
    moder10
's Avatar
    Guest

    Siemens A60, C60, etc BZZZZZ on power

    I tried to FLASH but this is the log....what do i have to do????

    Start...
    Loading ServiceBoot...
    Sending ServiceBoot Ok.
    HWID: 39 (A60)
    A60 lg1 Sw27 08.07.04 10:18:58
    IMEI: ***************
    DisplayID: 37, Philips Epson S1D15G14
    Code(05): OTP closed
    Code(08): BootKEY is unknown
    Code(0D): Keys are registered in BCORE
    Code(10): Minimal access to BFB
    Code(15): Complete condition
    Code(19): Monitoring is switched on
    Code(1D): Blocks 5121,5122,5123 are present
    Battery Voltage 3872 mV.
    SecurityMode: Customer
    Phone off...
    Open file "C:\Unlock siemens\A60\A60_16_fullflash_tr\a60_v16_fullflash_ tr\a60_v16_fullflash.bin" for write in Flash.
    FullFlash file info:
    FlashID: 0001/220C
    SIEMENS A60 Sw16 lg4
    RealLgPack: lg4
    Start...
    Loading BootsModel(A60)...
    StartBoot does not answer!



    I have done the DEFRAG,,,and this is the log:

    Start...
    Loading ServiceBoot...
    Sending ServiceBoot Ok.
    HWID: 39 (A60)
    A60 lg1 Sw27 08.07.04 10:18:58
    IMEI: ************
    DisplayID: 37, Philips Epson S1D15G14
    Code(05): OTP closed
    Code(08): BootKEY is unknown
    Code(0D): Keys are registered in BCORE
    Code(10): Minimal access to BFB
    Code(15): Complete condition
    Code(19): Monitoring is switched on
    Code(1D): Blocks 5121,5122,5123 are present
    Battery Voltage 3874 mV.
    SecurityMode: Customer
    Backup EEPROM blocks...
    SecurityMode: Customer
    Work only in FactoryMode! Use Skey!
    HWID: 39 (A60)
    EELITE Info: free buffer 51232 bytes, free at all 55572 bytes, free for deleted 55572 bytes.
    EEFULL Info: free buffer 87510 bytes, free at all 87722 bytes, free for deleted 22330 bytes.
    Read All EELITE blocks from 1 to 285 ...
    Read All EEFULL blocks from 5000 to 5408 ...

  2. #12
    moder10
    moder10
's Avatar
    Guest

    Siemens A60, C60, etc BZZZZZ on power

    I tried to make also....the DEFRAG EEP...... and this is the log.....then i have lunched the FULLFLASH....but nothing is happened....usually
    "WriteFlash block at 0x000000 does not answer crc!"

    Start...
    Loading ServiceBoot...
    Sending ServiceBoot Ok.
    HWID: 132 (MC60)
    MC60 lg95 Sw05 17.09.03 12:23:47
    IMEI: *************
    DisplayID: 0, Unknown or misses
    Code(05): OTP closed
    Code(08): BootKEY is unknown
    Code(0D): Keys are registered in BCORE
    Code(10): Minimal access to BFB
    Code(15): Complete condition
    Code(19): Monitoring is switched on
    Code(1D): Blocks 5121,5122,5123 are present
    Battery Voltage 3820 mV.
    SecurityMode: Customer
    Backup EEPROM blocks...
    No Ping mobile
    Backup EEPROM blocks...
    No Ping mobile
    Backup EEPROM blocks...
    No Ping mobile
    Backup EEPROM blocks...
    SecurityMode: Customer
    Work only in FactoryMode! Use Skey!
    HWID: 132 (MC60)
    EELITE Info: free buffer 54666 bytes, free at all 55624 bytes, free for deleted 55624 bytes.
    EEFULL Info: free buffer 85804 bytes, free at all 86484 bytes, free for deleted 21092 bytes.
    Read All EELITE blocks from 1 to 285 ...
    Read All EEFULL blocks from 5000 to 5418 ...

  3. #13
    gorandj
    gorandj
's Avatar
    Guest

    Siemens A60, C60, etc BZZZZZ on power

    reheat PCB then fullflesh ur phone...

  4. #14
    moder10
    moder10
's Avatar
    Guest

    Siemens A60, C60, etc BZZZZZ on power

    Hi guys,
    when i try to turn on the mobiles SIEMENS MC60, the display appear all blu and the mobile make BZZZZ then it turn off automatically.

    Please help me...let me know what do i have to do.

    This is the log:
    Start...
    Loading ServiceBoot...
    Sending ServiceBoot Ok.
    HWID: 132 (MC60)
    MC60 lg95 Sw05 17.09.03 12:23:47
    IMEI: ******************
    DisplayID: 0, Unknown or misses
    Code(05): OTP closed
    Code(08): BootKEY is unknown
    Code(0D): Keys are registered in BCORE
    Code(10): Minimal access to BFB
    Code(15): Complete condition
    Code(19): Monitoring is switched on
    Code(1D): Blocks 5121,5122,5123 are present
    Battery Voltage 3841 mV.
    SecurityMode: Customer

    Br, Moder

  5. #15
    moder10
    moder10
's Avatar
    Guest

    Siemens A60, C60, etc BZZZZZ on power

    What is the firrence between the 2 cable?
    Have a different circuit???

  6. #16
    valiu
    valiu
's Avatar
    Guest

    Siemens A60, C60, etc BZZZZZ on power

    write a full flash and after that do repair

  7. #17
    dagos
    dagos
's Avatar
    Guest

    Siemens A60, C60, etc BZZZZZ on power

    ...hmmm!
    Use fullflash for Joker, flash and unlock after.
    Download "MC60_0704_full_repair.rar" from: http://eh.student.utwente.nl/~landy/index.php?dir=Repair_FuBu/
    user: mobile
    password: elibom

    P.S. Is possible to have the hardware problem regarding to display...
    Br,
    dagos

  8. #18
    moder10
    moder10
's Avatar
    Guest

    Siemens A60, C60, etc BZZZZZ on power

    Many thanks bro, after the picture with cut i've flashed in a moment.
    This is the result of my log:

    Start...
    Loading ServiceBoot...
    Sending ServiceBoot Ok.
    HWID: 39 (A60)
    A60 lg1 Sw27 08.07.04 10:18:58
    IMEI: 351975007557851
    DisplayID: 37, Philips Epson S1D15G14
    Code(05): OTP closed
    Code(08): BootKEY is unknown
    Code(0D): Keys are registered in BCORE
    Code(10): Minimal access to BFB
    Code(15): Complete condition
    Code(19): Monitoring is switched on
    Code(1D): Blocks 5121,5122,5123 are present
    Battery Voltage 3811 mV.
    SecurityMode: Customer
    Phone off...
    Open file "C:\A60\A60_v23_FULL\A60_v23_FULL.bin" for write in Flash.
    FullFlash file info:
    FlashID: 0001/220C
    SIEMENS A60 Sw23 lg91
    RealLgPack: lg91
    Start...
    Loading BootsModel(A60)...
    StartBoot does not answer!
    Start...
    Loading ServiceBoot...
    Sending ServiceBoot Ok.
    HWID: 39 (A60)
    A60 lg1 Sw27 08.07.04 10:18:58
    IMEI: *************
    DisplayID: 37, Philips Epson S1D15G14
    Code(05): OTP closed
    Code(08): BootKEY is unknown
    Code(0D): Keys are registered in BCORE
    Code(10): Minimal access to BFB
    Code(15): Complete condition
    Code(19): Monitoring is switched on
    Code(1D): Blocks 5121,5122,5123 are present
    Battery Voltage 3810 mV.
    SecurityMode: Customer
    Phone off...
    Open file "C:\A60\A60_v23_FULL\A60_v23_FULL.bin" for write in Flash.
    FullFlash file info:
    FlashID: 0001/220C
    SIEMENS A60 Sw23 lg91
    RealLgPack: lg91
    Start...
    Loading BootsModel(A60)...
    Sending StartBoot Ok.
    Sending MainBoot Ok.
    SIEMENS A60 lg1 Sw27
    Soft FlashID: 0001/220C
    FlashID: 0001/227E-220C-2201
    Flash Size: 8Mb, WriteBuffer: 32 bytes
    Region(1): Blocks 128, Size 64Kb
    Start EEPROM segments at addres 0xFC0000
    FSN: 02AE23EA -> PhoneID: EA23AE02
    OTP IMEI: ****************
    HASH: D552E2F5A7B616F54759B9826402429C
    Read EEP0067 block (ver00), size 20 bytes - Ok.
    Read EEP0076 block (ver00), size 10 bytes - Ok.
    Read EEP5005 block (ver00), size 64 bytes - Ok.
    Read EEP5007 block (ver00), size 10 bytes - Ok.
    Read EEP5008 block (ver00), size 224 bytes - Ok.
    Read EEP5009 block (ver00), size 10 bytes - Ok.
    Read EEP5012 block (ver00), size 12 bytes - Ok.
    Read EEP5077 block (ver00), size 232 bytes - Ok.
    Read EEP5093 block (ver00), size 76 bytes - Ok.
    Read EEP5121 block (ver00), size 56 bytes - Ok.
    Read EEP5122 block (ver00), size 6 bytes - Ok.
    Read EEP5123 block (ver00), size 12 bytes - Ok.
    EEPROM blocks is written in ".\Backup\A60lg1Sw27_Backup080209000644.eep" file.
    USE SKEY: 12345678
    *#0000*12345678# - Network Lock
    *#0001*12345678# - Service Provider Lock
    *#0002*12345678# - Corporate Code
    *#0003*12345678# - Phone Code
    *#0004*12345678# - Network Subset Lock
    *#0005*12345678# - Only Sim
    Change BOOTKEY - Ok.
    Change EEP0076 - Ok.
    Change EEP5009 - Ok.
    Change EEP5077 - Ok.
    Change EEP5121 - Ok.
    Change EEP5122 - Ok.
    Change EEP5123 - Ok.
    Change BCORE HASH - Error!
    Restore EEP0067 - Ok.
    Restore EEP5005 - Ok.
    Restore EEP5007 - Ok.
    Restore EEP5012 - Ok.
    Restore EEP5093 - Ok.
    Data file "C:\A60\A60_v23_FULL\A60_v23_FULL.bin".
    Write Flash addr: 0x800000 size: 0x800000 - Ok.

    After the flash, mobile is also unlocked.....

    Start...
    Loading ServiceBoot...
    Sending ServiceBoot Ok.
    MobileMode: Service
    HWID: 39 (A60)
    A60 lg91 Sw23 30.01.04 10:46:42
    IMEI: ****************
    DisplayID: 37, Philips Epson S1D15G14
    FSN: 02AE23EA
    SW FlashID: 0001/220C
    Code(05): OTP closed
    Code(09): BootKEY is written in EEPROM
    Code(0D): Keys are registered in BCORE
    Code(13): Complete access to BFB
    Code(15): Complete condition
    Code(19): Monitoring is switched on
    Code(1D): Blocks 5121,5122,5123 are present
    Battery Voltage 3804 mV.
    SecurityMode: Factory
    Phone off...

    MANY MANY MANY THANKS....friends

  9. #19
    dagos
    dagos
's Avatar
    Guest

    Siemens A60, C60, etc BZZZZZ on power

    Hi,
    Soft FlashID: flash version in the fullflash file
    Flash ID: flash version in your phone (hardware)
    Search on the logfile from unlocking (if you unlocked with Joker) and you have the flash capacity.
    If you don't have, unlock it again.
    dagos

  10. #20
    moder10
    moder10
's Avatar
    Guest

    Siemens A60, C60, etc BZZZZZ on power

    I try to make FULLFLASH, but mobile ask me usually:

    Start...
    Loading ServiceBoot...
    Sending ServiceBoot Ok.
    HWID: 132 (MC60)
    MC60 lg95 Sw05 17.09.03 12:23:47
    IMEI: *********
    DisplayID: 0, Unknown or misses
    Code(05): OTP closed
    Code(08): BootKEY is unknown
    Code(0D): Keys are registered in BCORE
    Code(10): Minimal access to BFB
    Code(15): Complete condition
    Code(19): Monitoring is switched on
    Code(1D): Blocks 5121,5122,5123 are present
    Battery Voltage 3850 mV.
    SecurityMode: Customer
    Open file "C:\MC60\MC60_FullFlash\MC60_FullFlash.bin" for write in Flash.
    FullFlash file info not valid!
    Start...
    Loading BootsModel(MC60)...
    StartBoot does not answer!

    What do i have to do?

 

 

Quick Reply Quick Reply

Click here to log in


What color is our footer?

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. siemens a60
    By speedspeed in forum Siemens
    Replies: 3
    Last Post: 12-27-2011, 01:09 AM
  2. phonecode locked (siemens C60)
    By kalambula1200 in forum Siemens
    Replies: 1
    Last Post: 08-03-2010, 12:59 PM
  3. please i need falsh for Siemens C60 thank's
    By rtwrqtreretret in forum Siemens
    Replies: 6
    Last Post: 08-03-2010, 12:48 PM
  4. Unlocking Siemens C60
    By nirocha in forum Siemens
    Replies: 4
    Last Post: 08-03-2010, 08:54 AM
  5. unlock for SIEMENS A60
    By vikingz in forum Siemens
    Replies: 3
    Last Post: 08-02-2010, 11:48 PM

Bookmarks

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
  •