Welcome to Discuss Everything Forums...

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.


 

Tags for this Thread

+ Reply to Thread
Page 4 of 5 FirstFirst ... 2345 LastLast
Results 31 to 40 of 48
  1. #31
    dagos
    dagos
's Avatar
    Guest

    Siemens A60, C60, etc BZZZZZ on power

    ...Ok, to understood:
    -enter in service mode and send to me log file.
    -try to set your contrast (if have low level, your color display is blue).
    Goto the Contrast Tab in Joker -> Enter service mode ->Light on -> 5007 -> Read -> Adjust contrast -> 5007 Write
    - try to change your display (is the same with C60)....
    Is possible to have bad contact or missing connection between the phone microcontroller and display connector. Try to rehot the microcontroller BGA (using the hot air generator). Manny times here is the problem (on the Siemens phones - bad connection between the PCB pads and microcontroller).
    dagos

  2. #32
    Crumarix1
    Crumarix1
's Avatar
    Guest

    Siemens A60, C60, etc BZZZZZ on power

    did u try Contast tool for Siemens,usualy after flash u need to setup contrast level...


    and yes u need to do CUT...


    du u ewer read old post before u posting ???

  3. #33
    moder10
    moder10
's Avatar
    Guest

    Siemens A60, C60, etc BZZZZZ on power

    May i know the cut for siemens a60...where is?
    Many thanks

  4. #34
    moder10
    moder10
's Avatar
    Guest

    Siemens A60, C60, etc BZZZZZ on power

    ALL ok.

    Mobile now work, but...usually the language...no italian.

    The files are:

    A62C_070800_xbz.zip 12 4.8 MB 2006-Apr-16
    A62_060100_service.zip 10 4.5 MB 2005-Apr-12
    A62_069500_service.zip 12 4.3 MB 2005-Apr-12
    A62_070100_service.zip 18 4.4 MB 2006-Dec-04
    A62_070200_service.zip 5 4.4 MB 2006-Dec-04
    A62_070300_service.zip 5 4.4 MB 2006-Dec-04
    A62_070400_service.zip 10 4.4 MB 2006-Dec-04
    A62_070500_service.zip 13 4.4 MB 2006-Dec-04
    A62_070600_service.zip 9 4.4 MB 2006-Dec-04
    A62_070700_service.zip 4 4.4 MB 2006-Dec-04
    A62_079000_service.zip 4 4.4 MB 2006-Dec-04
    A62_079100_service.zip 137 4.4 MB 2006-Dec-04
    A62_079200_xbz.zip 272 4.3 MB 2006-Apr-16
    A62_079800_xbz.zip

    According what said , the A62_079800...means:
    A62...mobile
    07...firmware
    98...????
    00...language pack (01...is not present??)

    Br,
    Moder

  5. #35
    moder10
    moder10
's Avatar
    Guest

    Siemens A60, C60, etc BZZZZZ on power

    May i know the cut for siemens a60...where is?
    Many thanks


    Using FREIA...without cut.........this is the log:

    FREIA - Engine build 10, Frontend build 9
    Thanks goes out for the following:
    Maxim, Rolis, Sergey, PapaJoe, Lead,
    TheWizard, Jozso (for hardware and cable
    support and of course beta testing),
    Nico, Victor, Pinker, Tom,
    and all the others who supports ...
    COMM_LoadBoots : selected phone family is 13
    TTY_OpenCOMPort : opening COM1
    COMM_IsBootRunning : bootcode does not seem to be running
    COMM_LoadBoots : Waiting to power on the phone ...
    COMM_LoadBoots : phone is powered on
    COMM_SendBoot : boot file is not accepted


    Moder

  6. #36
    moder10
    moder10
's Avatar
    Guest

    Siemens A60, C60, etc BZZZZZ on power

    Hi dagos,
    i specify that each time i make something on the mobile, it makes BZZZZ.
    Said this, these following are the logs regarding each point you request:

    SERVICE MODE:
    Start...
    Loading ServiceBoot...
    Sending ServiceBoot Ok.
    MobileMode: Service
    HWID: 132 (MC60)
    MC60 lg95 Sw05 17.09.03 12:23:47
    IMEI: ************
    DisplayID: 34, Sharp Hynix HM17CM4101
    FSN: 26655A03
    SW FlashID: 0001/2212
    Code(05): OTP closed
    Code(09): BootKEY is written in EEPROM
    Code(0D): Keys are registered in BCORE
    Code(13): Complete access to BFB
    Code(15): Complete condition
    Code(19): Monitoring is switched on
    Code(1D): Blocks 5121,5122,5123 are present
    Battery Voltage 3776 mV.
    SecurityMode: Factory

    THE CONTRAST:
    this is the value
    44,48,0,0

    When i try to read it makes BZZZ, and after several times the result and the new settings:
    Read Contrast...
    No Ping mobile
    Read Contrast...
    No Ping mobile
    Read Contrast...
    Display1 contrast: 44, 48
    Display2 contrast: 0, 0
    Test Contrast 94...
    No Ping mobile
    Test Contrast 94...
    No Ping mobile
    Test Contrast 94...
    Write contrast (94, 95) in block 5007...
    Write block 5007 - Ok.
    Display1 contrast: 94, 94
    Display2 contrast: 95, 95


    After this, the mobiles work, but DISPLAY is always "Blu"


    Br, Moder

  7. #37
    moder10
    moder10
's Avatar
    Guest

    Siemens A60, C60, etc BZZZZZ on power

    I have the cable "For SIM C55" and port rs232.....infact when i try to read, appear that message on Joker.

    Moder

  8. #38
    gemmobile
    gemmobile
's Avatar
    Guest

    Siemens A60, C60, etc BZZZZZ on power

    then change display if phone works fine this models have a bad displays regards

  9. #39
    MaxPayne
    MaxPayne
's Avatar
    Guest

    Siemens A60, C60, etc BZZZZZ on power

    try here
    http://eh.student.utwente.nl/~landy/

    pass:
    mobile
    elibom

  10. #40
    moder10
    moder10
's Avatar
    Guest

    Siemens A60, C60, etc BZZZZZ on power

    Hi guys,
    when i try to turn on the mobiles SIEMENS A62, the mobile make "bzzzzz" and than turn off automatically.

    I know, i've to do the FULLFLASH, but after downloading files, i watched that some are for 8mb and other for 16mb.
    So....how can i unsterstand if i need the ff for 8mb instead of 16mb?

    I have these files:
    A62_16MB_Repair_FF.rar
    a62_full_0604.rar
    a62_v06.rar
    A62v07_8MB_Repair_FF.rar
    which is the file i must use???


    Br, Moder
    PS:::: this is the log of mobile

    SERVICE MODE
    Start...
    Loading ServiceBoot...
    Sending ServiceBoot Ok.
    MobileMode: Service
    HWID: 231 (A62)
    A62 lg98 Sw07 16.05.05 15:08:56
    IMEI: ******************
    DisplayID: 37, Philips Epson S1D15G14
    FSN: 3944D507
    SW FlashID: 0001/220C
    Code(05): OTP closed
    Code(09): BootKEY is written in EEPROM
    Code(0D): Keys are registered in BCORE
    Code(13): Complete access to BFB
    Code(15): Complete condition
    Code(19): Monitoring is switched on
    Code(1D): Blocks 5121,5122,5123 are present
    Battery Voltage 3780 mV.
    SecurityMode: Factory

    DEL INSTANCES
    Instance Format...
    Delete Instance "Voice Memo" - None.
    Delete Instance "Voice Dialing" - None.
    Delete Instance "Browser Cache" - None.
    Delete Instance "File System" - Ok.
    Delete Instance "Tegic" - None.
    Delete Instance "Address Book" - Ok.
    ReStart Phone!
    Instance Format...
    Delete Instance "Voice Memo" - None.
    Delete Instance "Voice Dialing" - None.
    Delete Instance "Browser Cache" - None.
    Delete Instance "File System" - Ok.
    Delete Instance "Tegic" - None.
    Delete Instance "Address Book" - Ok.
    ReStart Phone!

    DEFRAG EEP
    Backup EEPROM blocks...
    HWID: 231 (A62)
    EELITE Info: free buffer 55540 bytes, free at all 55572 bytes, free for deleted 55572 bytes.
    EEFULL Info: free buffer 87012 bytes, free at all 87224 bytes, free for deleted 21832 bytes.
    Read All EELITE blocks from 1 to 285 ...
    Read All EEFULL blocks from 5000 to 5439 ...

 

 

Quick Reply Quick Reply

Click here to log in


What comes after M0nday

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. siemens a60
    By speedspeed in forum Siemens
    Replies: 3
    Last Post: 12-27-2011, 01:09 AM
  2. phonecode locked (siemens C60)
    By kalambula1200 in forum Siemens
    Replies: 1
    Last Post: 08-03-2010, 12:59 PM
  3. please i need falsh for Siemens C60 thank's
    By rtwrqtreretret in forum Siemens
    Replies: 6
    Last Post: 08-03-2010, 12:48 PM
  4. Unlocking Siemens C60
    By nirocha in forum Siemens
    Replies: 4
    Last Post: 08-03-2010, 08:54 AM
  5. unlock for SIEMENS A60
    By vikingz in forum Siemens
    Replies: 3
    Last Post: 08-02-2010, 11:48 PM

Bookmarks

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
  •