Thread: Siemens A60, C60, etc BZZZZZ on power

Yes i've read the other post, but in no one i have found the solution.
I need to know how to make CUT on board.

Many thanks

Moder

Hi guys,
when i try to turn on the mobiles SIEMENS A60, the mobile make "bzzzzz" and than turn off automatically.

Please help me...let me know what do i have to do.

Br, Moder

PS:::: this is the log

Start...
Loading ServiceBoot...
Sending ServiceBoot Ok.
HWID: 39 (A60)
A60 lg1 Sw27 08.07.04 10:18:58
IMEI: **************
DisplayID: 37, Philips Epson S1D15G14
Code(05): OTP closed
Code(08): BootKEY is unknown
Code(0D): Keys are registered in BCORE
Code(10): Minimal access to BFB
Code(15): Complete condition
Code(19): Monitoring is switched on
Code(1D): Blocks 5121,5122,5123 are present
Battery Voltage 3887 mV.
SecurityMode: Customer

...UFFF... Moder

I see on your log and missing the Flash ID.
Try to fullflash your phone with 8MB fulflash and post log file.
Example:
Soft FlashID: 0001/220C
FlashID: 0001/227E-220C-2201
Flash Size: 8Mb

dagos

...download A60_270100_service.zip from the "landy" site.
You need to use X55 datacable (not C55 serial cable).
Because you cutted track, after open WinSwup file, check "skip" Pre-Check, click on the Start and quicly push shortly the phone red button.
Br,
dagos

[quote=moder10;3074490]Yes i've read the other post, but in no one i have found the solution.
I need to know how to make CUT on board.

Many thanks

Moder[/quote
yes you must cut TP to flash the phone

Hi guys,
when i try to turn on the mobiles SIEMENS C60, the display appear all blu and nothing happen, so i have excluded the display broken....i think is dead , so help me to make it survive.

Please help me...let me know what do i have to do.

Br, Moder

PS:::: this is the log

Start...
Loading ServiceBoot...
Sending ServiceBoot Ok.
HWID: 40 (C60)
C60 lg95 Sw12 26.09.03 12:17:03
IMEI: **************
DisplayID: 37, Philips Epson S1D15G14
Code(05): OTP closed
Code(08): BootKEY is unknown
Code(0D): Keys are registered in BCORE
Code(10): Minimal access to BFB
Code(15): Complete condition
Code(19): Monitoring is switched on
Code(1D): Blocks 5121,5122,5123 are present
Battery Voltage 3869 mV.
SecurityMode: Customer

The mobile SIEMENS C55, at startup make all automatically, start "siemens be inspired", click ok ( i can't click it) and the turn off.
When i try to read it with joker, the result is:
Start...
Loading ServiceBoot...
Sending ServiceBoot Ok.

IMEI:
Error Get Battery Voltage!
SecurityMode: Error!

So i decided to make cut on board, but the result is the same:
Start...
Loading ServiceBoot...
Sending ServiceBoot Ok.

IMEI:
Error Get Battery Voltage!
SecurityMode: Error!

Someone can help me???

Br, Moder

here it is
be careful

br

OK...cut DONE....i tried to make ullflash, but JOKER ask me in this way:

Start...
Cancel.
Start...
Loading ServiceBoot...
Sending ServiceBoot Ok.
HWID: 132 (MC60)
MC60 lg95 Sw05 17.09.03 12:23:47
IMEI: *****************
DisplayID: 0, Unknown or misses
Code(05): OTP closed
Code(08): BootKEY is unknown
Code(0D): Keys are registered in BCORE
Code(10): Minimal access to BFB
Code(15): Complete condition
Code(19): Monitoring is switched on
Code(1D): Blocks 5121,5122,5123 are present
Battery Voltage 3823 mV.
SecurityMode: Customer
No Ping mobile
Start...
Loading ServiceBoot...
Sending ServiceBoot Ok.
HWID: 132 (MC60)
MC60 lg95 Sw05 17.09.03 12:23:47
IMEI: *****************
DisplayID: 0, Unknown or misses
Code(05): OTP closed
Code(08): BootKEY is unknown
Code(0D): Keys are registered in BCORE
Code(10): Minimal access to BFB
Code(15): Complete condition
Code(19): Monitoring is switched on
Code(1D): Blocks 5121,5122,5123 are present
Battery Voltage 3828 mV.
SecurityMode: Customer
No Ping mobile
Open file "C:\MC60\MC60_FullFlash\MC60_FullFlash.bin" for write in Flash.
FullFlash file info not valid!
Start...
Loading BootsModel(MC60)...
Sending StartBoot Ok.
Sending MainBoot Ok.
SIEMENS MC60 lg95 Sw05
Soft FlashID: 0001/2212
FlashID: 0001/227E-2212-2200
Flash Size: 16Mb, WriteBuffer: 32 bytes
Region(1): Blocks 256, Size 64Kb
Start EEPROM segments at addres 0xFC0000
FSN: 26655A03 -> PhoneID: 035A6526
OTP IMEI: ***************
HASH: 580CB49008CC78F5B102AB1C31C439D1
Read EEP0067 block (ver00), size 20 bytes - Ok.
Read EEP0076 block (ver00), size 10 bytes - Ok.
Read EEP5005 block (ver00), size 64 bytes - Ok.
Read EEP5007 block (ver00), size 10 bytes - Ok.
Read EEP5008 block (ver00), size 224 bytes - Ok.
Read EEP5009 block (ver00), size 10 bytes - Ok.
Read EEP5012 block (ver00), size 12 bytes - Ok.
Read EEP5077 block (ver00), size 232 bytes - Ok.
Read EEP5093 block (ver00), size 76 bytes - Ok.
Read EEP5121 block (ver00), size 56 bytes - Ok.
Read EEP5122 block (ver00), size 6 bytes - Ok.
Read EEP5123 block (ver00), size 12 bytes - Ok.
EEPROM blocks is written in ".\Backup\MC60lg95Sw05_Backup080208224207.eep" file.
USE SKEY: 12345678
*#0000*12345678# - Network Lock
*#0001*12345678# - Service Provider Lock
*#0002*12345678# - Corporate Code
*#0003*12345678# - Phone Code
*#0004*12345678# - Network Subset Lock
*#0005*12345678# - Only Sim
WriteFlash block at 0x000000 does not answer crc!



And now???
What is my new step???

Many thanks friends for your help

You're my IDLE ...dear DAGOS...
while i'm flashing the mobile with the 8MB ff....let me understand how i can derive that i had to use the 8mb....it depends from SoftFLASH ID....so i search the version 0001 and the compatibility???
Is it correct?

Br, Moder