what version of the PRL are you using. I tried the OTA Bypass and its still not working :doh:
Maybe I'm missing a step on the OTA Bypass
what version of the PRL are you using. I tried the OTA Bypass and its still not working :doh:
Maybe I'm missing a step on the OTA Bypass
Well, I got the EVDO PRL to work, but still cant get WAP or MMS working properly.
-------------------------
Little off topic, on topic at the same time.... I've had phones come back with an odd symptom....
Customer can make calls, but when receiving them, they just to go voice mail
:disappoin
I have 3 Sprint Blackberry Curves 8330 running 4.5.0 Software. I'm looking for the SPC code on these. I have tried both addresses in UniCDMA .98.
0x10700000
0x1067ED90
9:36:25 AM : Switching into DM Mode...
9:36:25 AM : Phone is in DM Mode now!
9:37:05 AM : Reading 1703936 bytes of memory, starting from 0x10700000
9:37:05 AM : Read error at address 0x10700000
10:06:08 AM : Switching into DM Mode...
10:06:08 AM : Phone is in DM Mode now!
10:06:17 AM : Reading 1703936 bytes of memory, starting from 0x1067ED90
10:06:17 AM : Read error at address 0x1067ED90
Am I retarded? Is there a different address for Software Version 4.3.0.127 and 4.5.0?
I'm a novest but have flashed several Blackberrys.
Thanks for you time.
Unplug the phone, do a phone security wipe. Once the phone turns on, then pull the battery for 10 seconds, I know its a pain, but when I don't do that order, it doesn't work 30% of the time, the rest ... I don't have that problem, then once the phone comes back up, press # # # #, End.
then try
0x1070FA96 set bytes to 6
0x1070fac7 set bytes to 1703936
0x011DF400 set bytes to 1703936
Ok, I got it to work... The new OS version of the BB 8330 by sprint that is 4.5.0.175 platform 3.4.0.55 will not allow you to get the SPC code, nor will it (if you do get the code) not allow WAP or MMS using Tony's Books...
What I did to correct this is downgrade the OS to v4.5.0.188
then did the flash, everything worked perfect...
Thank you everyone for helping get to this conclusion and all your hard work for this matter.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks