contact me i will give you some space to upload
msn : [email protected]
icq : 59685794
contact me i will give you some space to upload
msn : [email protected]
icq : 59685794
PLs load this full 14M, using freaia to flash and unlock cos with 16M full, you need SST:
http://support.gsm.com.vn/anhtam/CF62_v84_lg95_00200000.zip
now that there is a test point for cf62. what is the procedure to unlock t62t t-mobile? does the phone still need to be flashed with v7 firmware? or can phone can be unlock without flashing?
Since this is a tricky TP to cut, and we know by now that there is a direct line from simcard reader pin 6 to CPU ball U15, and that the simcard pin 6 line passes rigth under the TP line. I thought-up a method to maybe lessen the risk, of cutting the simcard-reader line and avoid the "insert sim card" problem. See attached.
before unlocking ,i took its backup in patched Freia by Seba..
then i unlock it,shows OK,
but after that phone says INSERT SIM having sim inside..
i upload v7 flash 12mb,eeprom256kb,and boot 2 mb in it
phone gets dead
then again i flashed it with backup..still dead,
then i flashed it with repair flash V7 14mb..phone gets ON but no display
i suuccessfully set contrast at last with SST TOOLBOX 4.81
now phone is ON,but again with INSERT SIM ,having sim inside,
any solution for this ??
Raman
icq 167901740
[email protected]
must read all posts
i wrote that i test this solution and work 10000000000000000000%
i make mistake before cuting.
ONCE AGAIN 100%
someone read eeprom ver 11 and send me please
[email protected]
thanx
Hot AIR in america means "Loud and confused and empty talk" meaninglessness, nonsense. Donot cut or do anything untill you get more information. If this is a false statment that person be should be barred.
If in doubt look-up in a american dictionary "hot air"
I also have "insert sim card" with card in phone.
Which SW you use for flash with 14mb flash file?
Regards
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks