Thread: Need carb help on my kawasaki lakota 300..?

i have a 2002 kawasaki lakota 300. When i start it up with the choke on it idles fine but it stals when i turn the choke off. i have adjusted the idle screw but it still happens. at idle it will run but when the throttle is pressed it spudders and stals. I habe cleaned and reassembled the carb and it still happens.. any one know if it could be valve problem or just the carb... thanks
i have a 2002 kawasaki lakota 300. When i start it up with the choke on it idles fine but it stals when i turn the choke off. i have adjusted the idle screw but it still happens. at idle it will run but when the throttle is pressed it spudders and stals. I habe cleaned and reassembled the carb and it still happens.. any one know if it could be valve problem or just the carb... thanks
..

I have blown al the jets out and made sure no port in the carb is clogged..Does anyone know what size main and piolt jet should be in there. everything is STK

sounds like you have a blocked port in the carb. possibly an idle port.
If it's been sitting for a while this is common. Tear the carb down again, making sure all of the jets, etc. are open before you reassemble. Don't ream anything out larger than it already is.