Electronic cigarettes can also be called electronic atomizer,it is modeled
on the principles of cigarettes is made and be become,starts out eight
years ago.Due to the traditional cigarette easily addictive like a
drug,and it is difficult to quit,make electronic cigarettes as an
alternative to cigarettes,and liked by the majority of smokers.Electronic
cigarette is between electronic components and new food products
before,but from this year's European conference on October 8,electronic
cigarettes are classified in drug could see this proposal,electronic
cigarettes are dismissed as medical product now.
At present the electronic cigarettes hot sales market mainly in the United
States,and in the European market in recent years has been selling
presents ascendant trend.
Electronic cigarettes,it is by the chip,lithium batteries,gas
sensors,atomizer,smoke,smoke bombs,the atomizer is one of the most
important part.When we use mouth smoke bombs,the air pressure into the
size of the current gas sensors to enlarge chip processing,again by chip
to control the output of atomizer fever wire,through the heat will have a
smoke,smoke oil atomization,and just like with true smoke effect.
In recent years,with an increasing demand of the electronic
cigarette,electronic cigarette quality is uneven.According to media
reports,a Florida man electronic smoke in the home at night,due to the
explosion of electronic cigarettes,man's teeth ripped off,face also been
seared in the ce4 atomizer.
In fact ,the quality of electronic cigarette ce4 atomizer is mainly to see
the quality.The main components of the ce4 atomizer spray cap is again
outside the ( steel ) ,internal spray sets,foam ,ceramic seat,fiberglass
rope,heating wire ,needle nozzle ,and several other major components.
The main effect of the various components of which are:
Outer atomization sets: the core component of the ce4 atomizer airtight
isolation with the outside world ,to enable it to work properly while
avoiding high temperature heating wire burns the human body.
Foam: Fixed ceramic base and inner sleeve atomized oil while supporting
fiberglass rope ,heat ,breathable properties make foam can better enhance
the atomization.
Ceramic Block: Fixed spray wire rope and fiberglass base.Ceramic Block
fire effects and ultra-small expansion coefficient can withstand high
temperature instantaneously atomized wire ,to ensure stable operation ce4
atomizer.
Fiberglass rope:can withstand 1200 ° temperature while absorbing effect
is also very good.Ensure continuous high temperature heating wire
,absorbing plenty of smoke oil.
Heating wire: resistance is powered by its own heating principle ,to
elevate the temperature to evaporate the fiberglass ropes smoke oil
,making the oil smoke from liquid into gaseous state.
Syringe nozzle: Connect nebulizer nozzle section ,there are internal
hollow fiberglass rope length.
Nebulizer works: Insert the nebulizer reservoir syringe nozzle,fiberglass
rope inside the nozzle inside the smoke quickly absorb the oil.When the
heating wire is energized at the same time will evaporate fiberglass ropes
smoke oil to make it into steam fog installed.
Therefore,thece4 atomizer is to determine the quality of a key factor in
the quality of the electronic cigarette ,a good ce4 atomizer can make
healthy work.
The above information is provided by the ecigsbuy.ecigsbuy.com