Radio Lab Tool

[Antoinnette]

anyway to change pin and imei without mfi first ?

[ratgirl]

Thanks. However I have 8830.
In Radio Lab tool, I only see GSM & the 8830 IMEI, PIN & BSN.
1. What abt CDMA info? It is not diaplyed?
2. Even after refreshing NW in GSM, I am not seeing my GSM NW. Device is in GSM mode. Nor I am able to read data from device in GSM mode as it gives error message log - No NW found. Pl advice
3. Pl share a Reference manual for RadioLab tool so I can experiment with diff parameters.
4. If GSM NW is not showing, Can I still change IMEI & PIN?
Pl advice
Thanks

[Stupify]

Hi, I installed MFI Loader and give me the error:

Cannot create CFP instance. Please ensure the BBCFPCOM driver is registered.

Can you help me.

Giovanni

[Lisa L]

i had this error the one day. you need to change the rim virtual usb port to com 3 and 4. to do this right click on my computer and go to properties. then select hardware and go to device manager. From there go to the port. under there you will see to virtual usb ports. double click on them and then click the port tab and change it to com 3 and 4 and then it should work.

[sarahstarr12]

sorry if this is a stupid question but what is the point in changing the IMEI or PIN???

[JeeVee]

Did you write/change the BSN also or you only changed IMEI/PIN? Did your device connect to RIM NOC and get EDGE? can you use BES? Thanks for your reply.

[AALUNGA]

Link for loader please...

[The Question Asker O.o]

sure it works ... yo can request to IRAWAN88 for fresh imei and pin .. he already gave me more than 200 new pins and all works with BIS.
I wonder how he did it ..

[~New Divide~]

open 2G/3G on bold at&t this soft i can?

[threesevens]

now here last version



http://rapidshare.com/files/179808087/IMEI_blackb_tool_original.exe




B.R