Ok so I have an instinct I have flashed to cricKet and talk and text is flawless. I know MMS will not work but I am having a bit of trouble with the WAP setting. I have followed the thread on HF to the T and I to no avail can have internet. I figured maybe I need diff. DNS IP's for Cin./ Dayton area? Here is the tut. I followed:
After Changing your spc to 000000
and flashing the Cricket prl to the phone...
do the esn change through cricket..
perform *228 and get all things updated...
after this go back to Qpst and read the phone..
once you read the phone.. go to m.ip and change from mobile ip to simple ip only,,, and look at the first 2 user profiles under m.ip open each one up and change the Nai to [email protected],, for both standard and tethered...
remove any ip address that you find in these 2 profiles. and remove any other profiles except the first 2.
also make sure both of them say enabled...,,
now go to ppp config...
look at the tabs that say um and an... under these 2 tabs,, the user id should be [email protected] tethered id should be the same,, password is cricket in lowercase on both tabs,, remove any dns ip address you find in either tab also. just make sure all ip address are blank.
once you are completed with this,, move on to the next step..
click on phone icon
click on dialer..
enter ##3282#
click user name
click edit
enter your spc which should already be 000000 by now
starting from the top here ya go...
User Name "[email protected]"
SPI MN-HA "1234"
SPI MN-AAA "1234"
M Home Address "066.179.166.148"
Prim Ha Ip "010.000.005.021"
Sec Ha Ip "010.000.005.022"
Rev Tunneling "Off"
AAA Password "cricket"
HA Password "cricket"
click done,, allow the phone to reboot...
Now do ##3282# again.. this time go to browser
click edit
enter spc
youll see gateway1 and gateway2,,, under both of these
you will see primary and secondary,,, set primary and secondary ip`s for both gateways to 172.029.223.007,, they will all be the same ip address,, and set the Port and secure Port for all gatways to 8080,, hit done reboot and padow.. there you go...
Any help would be great I know the ports will be the same but I just think maybe the home address or something is diff. for me. Thanks ahead of time for any help I receive N8
Bookmarks