Can someone pliz show me how to unlock 2G ver. 3.1.3 without wifi as I am not near any wifi zone.
Thank you
Can someone pliz show me how to unlock 2G ver. 3.1.3 without wifi as I am not near any wifi zone.
Thank you
Download for iPhone Jailbreak
Windows VersionMac VersioniPhone OS 3.1.3 Download HereiPhone OS 3.1.2 Download Here
Step 1. If you have not already, download the original firmware 3.1.2 and 3.1.3 on the desktop of your computer. In case of unlocking an iPhone EDGE, be sure you also have the two files Bootloader: bl39.bin and bl46.bin
Step 2. Connect the iPhone to PC or Mac and update your iPhone 2G to firmware 3.1.3
Step 3. Launch the application and click on Browse. Select the original firmware 3.1.2 [select 3.1.2 not the 3.1.3] from the desktop of your computer and then click on Next
Step 4. It will start an automatic process (and very fast) which will be downloaded and patched the kernel.
Following a new screen will appear. Cydia is already selected.
Install Cydia: Main reason why we jailbreak iPhone.Verbose Boot: Will allow you to replace the boot with the apple (boot chart) with the verbose mode, or the ability to see everything that is loaded at startup;Custom Boot Logo: Bore with classic apple startup, change with your face or whatever else. Size should be 320X480.Recovery Custom Logo: A logo that will replace the classic Recovery;Already Pwned: Select if you want to install the verbose boot or change the boot and recovery logos on an iPhone on which has already been to jailbreak; Step 5. Now you will be asked to put the iPhone in Recovery Mode (iPhone 3GS) or DFU (the other iPhone / iPod).How to put your iPhone in recovery mode :
Turn the device completely off and disconnect it from cable/dock.Hold down the home button.While holding down the home button connect to a computer with a cable (easiest) or dock.Keep holding down the home button until you see a connect-to-iTunes screen You are now in recovery mode. To escape Recovery Mode and power the phone off simply hold down power and home buttons for ten seconds.How to put your iPhone in DFU mode :
Connect your iPhone to your computer.Turn iPhone off.Hold power and home together for 10 seconds (exactly).Release power but keep holding home until the computers beeps (observed on a PC) as a USB device is recognized.A few seconds later iTunes should detect your iPhone.If the Restore Logo is present on the screen, you are in Recovery Mode, not DFU. Step 6. Once you are in recovery mode/dfu mode redsn0w will start another automated process to complete the Jailbreak.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks