Thank you shahzaadbutt ! Very good job.
Any information how to make ' cable series CA-A31 ' For COM port !
What is this: INGNITION pin ?
7 = Ign
Thank you shahzaadbutt ! Very good job.
Any information how to make ' cable series CA-A31 ' For COM port !
What is this: INGNITION pin ?
7 = Ign
Great!
Can you please post pinout for cable you used.
What cable have you used; USB or Serial COM?
Thanks
the panel looks different. i didnt cut anything bad i hope.
any other TP pictures of other kind of PCB-s.?? (af51)
look at the selected com port, its COM1 its mean that he is using COM Port cable
TO Unlock with joker v0343
Make TP with i Attached
Select AX72/75/C110.
Use OTP IMEI
RECALC ALL KEYS
Unlock DONE
Here is the Pinout
AF51, A31
Pin Signal
3 = Rx
4 = Tx
5 = GND
7 = Ign
Tutorial Here...
First step:
We will use software free Joker v0343 or superior version available for unloading at the end of this manual. We used the cable series unlock compatible reference CA-A31 with the new models Siemens/Benq A31, AF51, X81, EL71, S68.
Second step:
We opened the telephone and we cut the track indicated in red in the superior image (it presses on the image to extend it). We will cut by where it is indicated crossed in red the track for being the site more surely. We already can mount the telephone again. We connected the telephone extinguished to the cable series and connected this a port COM1 of the PC. We selected in software AX72/75/C110. We selected in software USES OTP IMEI. We selected port COM1. We pressed RECALC ALL KEYS. We pressed power on button of the telephone seconds until software loaded boot. The process unlock will take a little with this software. We will hope to that the process finalizes, as is in the superior image. Although Joker is a shareware, even supports new flash ST of the A31 model.
Enjoy all the forum members
brb
shahzaadbutt
unlock cable com or uni-box unlock cable for siemens c55
for DB9 com cable you need max3232
Anyone need cable for a31
Contact me on prv or check on our website
BR
Go play on mIRC, and don't spaming this forum! Stop posting stupid questions! Search in this forum before posting! Learn English! And don't post the same stupid question two times!
Ok great, it's a RS-232 cable.
I don't know pinout on DB9 side of the cable ?!
Does anybody know?
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks